home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
AOL File Library: 2,801 to 2,900
/
aol-file-protocol-4400-2801-to-2900.zip
/
AOLDLs
/
Hardware Text Files
/
TEXT_ Teac Hard Drive Informa
/
TEACINFO.txt
< prev
Wrap
Text File
|
2014-09-28
|
1KB
|
39 lines
TEAC IDE/HD INFORMATION
MASTER/SLAVE STRAP CONFIGURATION
Models: S340, 380 & 3105
________________S0 ____S1_____S2_____S3___
Single Drive: ON OFF ON ON
Master: ON ON ON ON
Slave: ON ON OFF ON
Models: SD3210 & 3240
________________SP_____S0_____S1_____S2_____S3___
Single Drive: ON Off Off OFF OFF
Master: ON OFF OFF OFF ON
Slave: ON OFF OFF ON ON
Note: Jumpers are located at the rear of the drive to the right of
the data cable connection and are read right to left. S0/SP is
located at the outer most edge of the case.
CMOS (BIOS) SETUP: CAPACITY = HDS * CYL * SEC* 512 BYTES
_Model_____Type____Heads_____Cyl._____Sec._____W-Pre_____Land-Z__
SD340 17 5 977 17 300 977
SD380 U-Def 4 1025 40 300 1025
SD3105 U-Def 5 1025 40 300 1025
SD3210 U-Def 10 1025 40 300 1025
SD3240 U-Def 8 965 62 300 965
The user defined drive type is typically type 47, however check your systems
BIOS for its User Defined Drive Type. Then enter the above parameters
for the model you have.
The abouve information was obtained directly from TEAC. Thier automated
FAX on demand is (213) 727-7629.